Product ID:FLEET-X ENAMEL,NON-LEAD COLORS,ENL-LF
MSDS Date:05/28/1985
FSC:8010
NIIN:00N009897
MSDS Number: BHFKN

ACME AUTOMOTIVE FINISHES

101 PROSPECT AVENUE NW
CLEVELAND, OH 44115

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: ACMEA

ACME AUTOMOTIVE FINISHES

CLEVELAND, OH 44115 US

Telephone: 216-566-2917

Cage: ACMEA

0.9

CAS: 64742-48-9

Fraction By Weight: 5-15%

OSHA PEL N/K

ACGIH TLV: N/K

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-30%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 0-5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

0.7.

CAS: 64742-95-6

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K

1.0.

CAS: 64742-47-8

Fraction By Weight: 1-35%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED OVEREXPOSYRE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:N/K .SKIN:IRRITANT.INGESTION:N/K
.INHALATION:IN A CONFINED AREA VAPORS IN HIGH CONCENTRATION ARE
ANESTHETIC.OVEREXPOSURE MAY RESULT IN LIGHTHEADEDNESS AND
STAGGERING GAIT.IR RITANT TO UPPER RESPIRATORY SYSTEM.
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES.GET MEDICAL ATTENTION.SKIN:WASH AFFECTED AREA THOROUGHLY
WITH SOAP AND WATER.REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
RE-USE.INGES TION:CALL MD IMMEDIATELY .INHALATION:IF
AFFECTED,REMOVE FROM EXPOSURE.RESTORE BREATHING.KEEP WARM AND
QUIET.

Flash Point Method:PMCC
Flash Point:73F,22.78C
Lower Limits:0.7
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.H*2O SPRAY MAY BE INEFFECTIVE.IF USE H*2O,FOG NOZZLES PREF.MAY USE
H*2O TO COOL CLSD CONTRS TO (SEE SUPP DA)
Unusual Fire/Explosion Hazard:KEEP TIGHTLY CLSD (CLSD CONTRS MAY EXPLO
ON EXPOS TO EXTREME HEAT).AVOID HEAT,ELEC EQUIP,SPARKS & OPEN
FLAME.APPLIC TO HOT SURFACES REQ SPEC PREC.(SEE SUPP DA).

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.VENTILATE AND
REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:N/K

Handling and Storage Precautions:FLAM VENT TO ELIM ALL VAP.ELIM ALL
SOURCES OF IGNIT-NO SMOKING,PILOT LIGHTS,ELEC
TOOLS/APPLIANCES.CONSULT NFPA CODE.USE APPRVD BONDING/GROUNDING
PROC.
Other Precautions:KEEP CONTR CLSD WHEN NOT IN USE.TRANSFER ONLY TO
APPRVD CONTRS W/ COMPLETE & APPROP LBLING.DO NOT TAKE
INTERNALLY.KEEP OUT OF REACH OF CHILDREN.DELIB CONC/INHAL OF
CONTENTS CAN BE HARMFUL OR FATAL.COA TING CONTAINS NUISANCE (SEE
SUPP DATA)

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOC VENT PREF.GEN EXHAUST ACCEPTABLE IF EXPOS IS KEPT BELOW
APPLIC EXPOS LIMITS.SEE OSHA STANDARDS 1910.94,.107,.108.
Protective Gloves:AS RECOMM BY SUPPLIER FOR THESE MATRLS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K
Work Hygienic Practices:USE ONLY WITH ADEQUATE VENTILATION.AVOID
BREATHING VAPOR/SPRAY MIST.AVOID SKIN AND EYE CONTACT.WASH HANDS
AFTER USING.
Supplemental Safety and Health
SPEC GRAV:0.947-1.21 (WATER=1).FIRE FIGHT PROC:PVNT PRESS BUILD-UP &
POSSIBLE AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT.EXPLO HAZ:IN
EMER CONDT OVEREXPOS TO DECOMP PROD (CO*2,CO) MAY BE HEALTH HAZ.SY
MPT MAY NOT BE IMMED APPARENT.GET MED ATTN.OTHER PREC:PARTIC WHICH
MAY BE HAZ WHILE SANDING/ABRADING DRIED FILM.

Boiling Pt:B.P. Text:222-395F
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>AIR
Spec Gravity:(SEE SUPP DATA)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:N/K
Percent Volatiles by Volume:58-65

Stability Indicator/Materials to Avoid:YES
METALLICS CONTAIN ALUM.CONTAM W/ H*2O,ACIDS OR ALKALIS CAN PROD
HYDROGEN,CAUSING DANGEROUS INC PRESS IN CLOSED CONTRS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:INCINERATE IN APPROVED FACILITY.DO NOT
INCINERATE CLOSED CONTAINER.DISPOSE OF IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS REGARDING POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.